https://doi.org/10.1016/j.compstruct.2019.111670 ·
Видання: Composite Structures, 2020, с.111670
Видавець: Elsevier BV
Автори: Tianyu Chen, Christopher M. Harvey, Simon Wang, Vadim V. Silberschmidt
Список літератури
- Colin de Verdiere, Influence of loading rate on the delamination response of untufted and tufted carbon epoxy non crimp fabric composites: mode I, Eng Fract Mech, № 96, с. 11
https://doi.org/10.1016/j.engfracmech.2012.05.015
- Isakov, Fracture toughness measurement without force data – application to high rate DCB on CFRP, Compos Part A, № 119, с. 176
https://doi.org/10.1016/j.compositesa.2019.01.030
- Smiley, Rate effects on mode I interlaminar fracture toughness in composite materials, J Compos Mater, № 21, с. 670
https://doi.org/10.1177/002199838702100706
- Blackman, The failure of fibre composites and adhesively bonded fibre composites under high rates of test, J Mater Sci, № 31, с. 4451
https://doi.org/10.1007/BF00366341
- Liu, Loading rate dependency of Mode I interlaminar fracture toughness for unidirectional composite laminates, Compos Sci Technol, № 167, с. 215
https://doi.org/10.1016/j.compscitech.2018.07.040
- Cidade, Determination of mode I dynamic fracture toughness of IM7-8552 composites by digital image correlation and machine learning, Compos Struct, № 210, с. 707
https://doi.org/10.1016/j.compstruct.2018.11.089
- Bedsole, An experimental investigation of interlaminar and intralaminar dynamic fracture of CFRPs: effect of matrix modification using carbon nanotubes, Compos Struct, № 132, с. 1043
https://doi.org/10.1016/j.compstruct.2015.07.016
- Liu, Cohesive zone and interfacial thick level set modeling of the dynamic double cantilever beam test of composite laminate, Theor Appl Fract Mech, № 96, с. 617
https://doi.org/10.1016/j.tafmec.2018.07.004
- Kang, Dynamic stationary crack analysis of isotropic solids and anisotropic composites by enhanced local enriched consecutive-interpolation elements, Compos Struct, № 180, с. 221
https://doi.org/10.1016/j.compstruct.2017.08.021
- Huang, Investigation on mixed-mode dynamic stress intensity factors of an interface crack in bi-materials with an inclusion, Compos Struct, № 202, с. 491
https://doi.org/10.1016/j.compstruct.2018.02.078
- Chen, Dynamic interfacial fracture of a thin-layered structure, Proc Struct Integr, № 13, с. 613
- Chen, Dynamic interfacial fracture of a double cantilever beam, Eng Fract Mech
- Grant, Beam vibrations with time-dependent boundary conditions, J Sound Vib, № 89, с. 519
https://doi.org/10.1016/0022-460X(83)90353-X
- Rao
- Freund
- Graff
- Gopalakrishnan
- Wang, Partition of mixed modes in layered isotropic double cantilever beams with non-rigid cohesive interfaces, Eng Fract Mech, № 111, с. 1
https://doi.org/10.1016/j.engfracmech.2013.09.005
- Kanninen, An augmented double cantilever beam model for studying crack propagation and arrest, Int J Fract, № 9, с. 83
https://doi.org/10.1007/BF00035958
- Gallagher, Bending of a Free Beam on an Elastic Foundation, J Appl Mech, № 50, с. 463
https://doi.org/10.1115/1.3167065
- Vesic, Beams on elastic subgrade and the Winkler’s hypothesis, с. 845
- Turon, An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models, Eng Fract Mech, № 74, с. 1665
https://doi.org/10.1016/j.engfracmech.2006.08.025
- Jih, Evaluation of a finite element based crack-closure method for calculating static and dynamic strain energy release rates, Eng Fract Mech, № 37, с. 313
https://doi.org/10.1016/0013-7944(90)90043-G
- Wood, Adhesion toughness of multilayer graphene films, Nat Commun, № 8
https://doi.org/10.1038/s41467-017-02115-w
Публікації, які цитують цю публікацію
Assessment of dynamic mode-I delamination driving force in double cantilever beam tests for fiber-reinforced polymer composite and adhesive materials
Tianyu Chen, Yiding Liu, Christopher M. Harvey, Kun Zhang, Simon Wang, Vadim V. Silberschmidt, Bingchen Wei, Xiang Zhang
Dynamic interfacial fracture
Tianyu Chen, Christopher M. Harvey, Simon Wang, Vadim V. Silberschmidt
https://doi.org/10.1016/b978-0-12-823979-7.00004-1
2023, Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, с.29-87
Цитувань Crossref:0
Theory of dynamic mode-II delamination in end-notched flexure tests
Tianyu Chen, Christopher M. Harvey, Simon Wang, Vadim V. Silberschmidt
https://doi.org/10.1016/j.compstruct.2021.114332 ·
2021, Composite Structures, с.114332
Scopus
WoS
Цитувань Crossref:2
An Analytical Solution of the Total Strain Energy Release Rate and Mode Partitioning of a Beam Type Delamination Specimen under High Speed Mixed-Mode Loading
Georgios Kotsinis, Theodoros Loutas
https://doi.org/10.1016/j.engfracmech.2022.109018
2023, Engineering Fracture Mechanics, с.109018
Scopus
WoS
Цитувань Crossref:0
High-Speed Mode-I Delamination
Tianyu Chen, Christopher M. Harvey, Simon Wang, Vadim V. Silberschmidt
https://doi.org/10.1007/978-3-030-47883-4_1
2020, Structural Integrity Proceedings of the Third International Conference on Theoretical, Applied and Experimental Mechanics, с.3-8
Scopus
Цитувань Crossref:0
Strain energy release rate under dynamic loading considering shear and crack tip root rotation effects
Georgios Kotsinis, Theodoros Loutas
https://doi.org/10.1016/j.euromechsol.2021.104435
2022, European Journal of Mechanics - A/Solids, с.104435
Scopus
WoS
Цитувань Crossref:2
Analytical corrections for double-cantilever beam tests
T. Chen, C. M. Harvey, S. Wang, V. V. Silberschmidt
https://doi.org/10.1007/s10704-021-00556-5
2021, International Journal of Fracture, №2, с.269-276
Scopus
WoS
Цитувань Crossref:6
An analytical study on the energy release rate of end-loaded split specimens under high-speed loading
Georgios Kotsinis, Ely Vlajos Gómez, Theodoros Loutas
https://doi.org/10.1016/j.euromechsol.2024.105296
2024, European Journal of Mechanics - A/Solids, с.105296
Scopus
WoS
Цитувань Crossref:0
Interfacial stress and crack propagation experimental study in mini-LED chip debonding
Li Ma, Yanhui Chen, Yun Chen, Maoxiang Hou, Xin Chen, Ching-Ping Wong, Yan Niu, Minghui Yao
https://doi.org/10.1016/j.ijmecsci.2024.109384
2024, International Journal of Mechanical Sciences, с.109384
Scopus
WoS
Цитувань Crossref:0
Знайти всі цитування публікації
Дані публікації
Кількість цитувань | 6 |
Кількість джерел у списку літератури: | 24 |
Видання індексується в Scopus | Так |
Видання індексується в Web of Science | Так |